BSYPS - M-COAT C RTV SILICONE RUBBER

  • MSDS: BSYPS
  • Manufacturer: MEASUREMENTS GROUP INC
  • Product Name: M-COAT C RTV SILICONE RUBBER
  • National Stock Number: 8030-01-328-7150
Product Identification

Product ID:M-COAT C RTV SILICONE RUBBER
MSDS Date:06/20/1991
FSC:8030
NIIN:01-328-7150
MSDS Number: BSYPS

Responsible Party
MEASUREMENTS GROUP INC
RALEIGH, NC 27611
US

Emergency Phone: 919-365-3800

Info Phone: 919-365-3800

Cage: 88952

Contractor
MEASUREMENTS GROUP INC
WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

Ingredients

LIGROINE; (VM&P NAPHTHA)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 100%

OSHA PEL 300 PPM;400 PPM STEL

ACGIH TLV: 300 PPM


(ORAL,RAT)4300 MG/KG

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 25%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


3140 RTV (DOW CORNING) (SEE SEPARATE MSDS FOR THIS

Fraction By Weight: 65%


300 G/LITER

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)4300 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: RESPIRATORY DISTRESS TO UNCON
WHEN TLV IS EXCEEDED. EYES: CAN CAUSE SEVERE IRRITATION, REDNESS,
TEARING & BLURRED VISION. SKIN: PROLONGED CONTACT CAN CAUSE
IRRITATION, DEFATTING, & DERMATITIS. INHAL: EXCESS INHAL CAN CAUSE
NASAL & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: RESP IRRIT, DEPRESS, DIZZ, NAUS,
CONFUSN, OR COLLAPSE. INGEST: CAN CAUSE GI IRRIT, NAUS, VOMIT, &
DIARR. (ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE CHEMICAL
PNEUMONITIS). CHRONIC: OVER-EXP OSURE MAY INCLUDE KIDNEY &/OR LIVER
DAMAGE.
Medical Cond Aggravated by Exposure:SEE HEALTH HAZARDS.

First Aid

First Aid:EYES: FLUSH W/COPIOUS AMTS OF WATER FOR @ LST 15 MIN. SEEK
MED AID. SKIN:THORO WASH EXPOSED AREA W/SOAP & WATER. LAUNDER
CONTAMD CLTHG BEFORE RE-USE. INHAL: REMOVE TO FRESH AIR. IF BRTHG
IS DFCLTY, AD MINISTER OXYGEN. IF BRTHG HAS STOPPED, GIVE ARTF
RESP. SEEK MED AID. INGEST: DO NOT INDUCE VOMIT. (ASPIR OF MATL
INTO LUNGS CAN CAUSE CHEM PNEUM). IF CONSCIOUS CAUTIOUSLY GIVE WARM
WATER, (SUPP DATA)

Fire Fighting

Flash Point Method:TCC
Flash Point:40F,4.4C
Lower Limits:0.9%
Upper Limits:6%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER TO KEEP FIRE EXPOSED CONTAINERS
COOL.
Unusual Fire/Explosion Hazard:VAPOR IS FLAMMABLE AND HVR/AIR, & MAY
TRAVEL TO IGNITION SOURCE AND FLASH BACK. SEALED CONTAINERS EXPOSED
TO HIGH HEAT MAY EXPLODE.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. CONTAIN SPILL AND
PICK UP WITH AN ABSORENT MATERIAL TO REMOVE ANY OIL-LIKE RESIDUE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 80F(27C) IN DRY
WELL-VENTILATED AREA. KEEP CONTAINERS TIGHTLY SEALED AND AWAY FROM
IGNITION SOURCE.
Other Precautions:AVOID PROLONGED BREATHING OF VAPORS AND EXTENDED SKIN
CONTACT.

Exposure Controls

Respiratory Protection:FOR AIR CONTAMINANTS ABOVE TLV OR PERMISSIBLE
LIMITS USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC VAPORS. FOR
EMERGENCY USE: NIOSH/MSHA APPROVED SCBA. USE NIOSH/MSHA APPROVED
RESP APPROP FOR EXPOSUR E OF CONCERN .
Ventilation:LOCAL EXHAUST/MECHANICAL: KEEP BELOW TLV.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:NEOPRENE OVER-CLOTHING AS NEEDED. SAFETY
SHOWER AND EYE WASH STATION MEETING ANSI DESIGN CRITERIA IN LOCAL
AREA .
Work Hygienic Practices:WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
FIRST AID PROC: THEN MINERAL OIL FOLLOWED BY HOT COFFEE OR STRONG TEA.
SEEK MEDICAL AID.

Chemical Properties

Boiling Pt:B.P. Text:225F,107C
Vapor Pres:25@68F
Vapor Density:3.7
Spec Gravity:0.85(H*2O=1)
Evaporation Rate & Reference:0.6(BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MILKY TRANSLUCENT LIQUID; NAPHTHALENE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:SOURCES OF IGNITION.
Hazardous Decomposition Products:OXIDES OF CARBON AND SILICON AND
INCOMPLETELY BURNED HYDROCARBON PRODUCTS.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE, AND FEDERAL
ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.